{"product_id":"fx-p-perma-magnet-330-kg","title":"FX-P Lifting Magnet 330 kg","description":"\u003ch2\u003ePermanent lifting magnet for thin sheet and tubes\u003c\/h2\u003e\n\u003cp\u003eThe FX-P330 from Flaig is a permanent lifting magnet for lifting and moving sheets, tubes and bars.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eWLL 330 kg on flat steel from 10 mm, air gap below 0.2 mm\u003c\/li\u003e\n  \u003cli\u003eWLL 300 kg on round workpieces Ø 40-160 mm, air gap below 0.2 mm\u003c\/li\u003e\n  \u003cli\u003eSafety factor 3.5, tested to EN 13155\u003c\/li\u003e\n  \u003cli\u003eDimensions 265 x 87 x 90 mm, weight 12.4 kg\u003c\/li\u003e\n  \u003cli\u003eMax. operating temperature 80 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eWhat affects the lifting capacity\u003c\/h2\u003e\n\u003cp\u003eAt 4 mm, the WLL drops to 100 kg. The 330 kg applies to workpieces up to 2,500 x 1,250 mm. The figures apply to low-carbon steel such as S235JR. Rust, paint, dirt and a roughly machined surface can create an air gap. The magnet cannot lift stainless steel, brass, aluminium or copper.\u003c\/p\u003e\n\u003cp\u003eCheck the magnet for defects and mechanical function before each use, and have it inspected at least every 12 months. Place it over the load's centre of gravity, lift a few centimetres first and check that the load is held securely. Pacemaker users need a doctor's consent to use it.\u003c\/p\u003e\n\u003cp\u003eSee the full range of \u003ca href=\"\/collections\/lifting-magnets\"\u003elifting magnets\u003c\/a\u003e.\u003c\/p\u003e","brand":"Flaig Magnetsysteme","offers":[{"title":"Default Title","offer_id":63237510496643,"sku":"10015791","price":7650.0,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0787\/1542\/1020\/files\/1_319d9d56-3b43-40cf-8ba4-ece6ead79052.png?v=1794288128","url":"https:\/\/wedolifting.com\/products\/fx-p-perma-magnet-330-kg","provider":"Fyns Kran Udstyr A\/S","version":"1.0","type":"link"}