FX-P Lifting Magnet 330 kg

Permanent lifting magnet for thin sheet and tubes

The FX-P330 from Flaig is a permanent lifting magnet for lifting and moving sheets, tubes and bars.

• WLL 330 kg on flat steel from 10 mm, air gap below 0.2 mm
• WLL 300 kg on round workpieces Ø 40-160 mm, air gap below 0.2 mm
• Safety factor 3.5, tested to EN 13155
• Dimensions 265 x 87 x 90 mm, weight 12.4 kg
• Max. operating temperature 80 °C

What affects the lifting capacity

At 4 mm, the WLL drops to 100 kg. The 330 kg applies to workpieces up to 2,500 x 1,250 mm. The figures apply to low-carbon steel such as S235JR. Rust, paint, dirt and a roughly machined surface can create an air gap. The magnet cannot lift stainless steel, brass, aluminium or copper.

Check the magnet for defects and mechanical function before each use, and have it inspected at least every 12 months. Place it over the load's centre of gravity, lift a few centimetres first and check that the load is held securely. Pacemaker users need a doctor's consent to use it.

See the full range of lifting magnets.